.:: Vintage Slides to JPEG ::.
Camera adapter for photographing slides
This is a father / son project. The goal is to 3D print a camera adapter for taking digital photos of old slides. STL files are provided on the bottom of this page, however you will need to make custom shims for your specific lens.
PHOTOS OF SLIDE SHOT PROJECT
3D rendering of device.
Device Photo #1.
Device Photo #2.
Device Photo #3.
Side view...
Front view...
In action #1...
In action #2...
Custom padded shims, that match our specific lens...
Spring slide spacers (must be super glued together at center, on both sides)...
Example of output...
Here are the STL files (tube and plate)...
SNAP_SHOT_001.stl
SNAP_SHOT_002.stl
Here are the STL files for the spring slide spacers...
SPRING_001.stl
SPRING_PLATE_001.stl