.:: 3D PRINT BAOFENG RADIO MOUNTS ::.
Mount your radio with 3D printable mounts
BAOFENG UV9R PRO CAR MOUNT, 3D PRINT
Print at 0.3mm layer height
10% to 100% infill
Mount with screws, double sided tape, or velcro.
BAOFENG UV9R PRO CAR MOUNT STL
HANDHELD RADIO BELT CLIP CAR MOUNT, 3D PRINT
Print at 0.3mm layer height
10% to 100% infill
Mount with screws, double sided tape, or velcro.
HT RADIO (W/ BELT CLIP) CAR MOUNT STL
HANDHELD RADIO BIKE MOUNT, 3D PRINT
This is to mount a UV5R or other radio with a clip to a bike.
For 22mm and 31.8mm handle bars.
Two versions... tight fit and loose fit.
Print at 0.3mm layer height
100% infill
22mm TOP STL
22mm BOTTOM STL
31.8mm TOP STL
31.8mm BOTTOM STL
22mm TOP LARGER HOLE STL
22mm BOTTOM LARGER HOLE STL
31.8mm TOP LARGER HOLE STL
31.8mm BOTTOM LARGER HOLE STL